Vitek VT-3496 Guida Utente Scaricare il pdf (Pagina 4)

VT-HDOC Series

1. BEFORE INSTALLING

• Installation should be carried out only by qualified personnel and in accordance with electrical regulations in

force.

• The DVR must be placed on a stable surface or mounted in an approved cabinet. Adequate ventilation must be

provided, taking particular care not to block any of the air vents on the DVR.

• Adequate protection against lightning strikes and power surges must be installed to prevent damage to the DVR.

• Any safety warnings on the DVR and in these instructions must be adhered to.

• If cleaning is necessary, shutdown the DVR and disconnect the power source first. Use a soft dry cloth only –

never use an abrasive cleaner.

• Do not attempt to service or repair the DVR as opening or removing covers may expose dangerous voltage or

other hazards. Refer all servicing to qualified service personnel

1.1 UPDATING SYSTEM F/W

1.1.1 WITH A USB THUMB DRIVE

Steps to upgrade the firmware via USB Thumb Drive:

1.1.1.1 How to verify the F/W version

Check the F/W version provided and the F/W version currently used in the system. From the MANAGEMENT

section under the SYSTEM menu, you can see the current version of F/W.

Verify the current F/W Version

Prepare new F/W on the USB thumb drive

Begin the firmware upgrade process

1 2 3 4 5 6 7 8 9 ... 95 96

Nessun commento

Vitek VT-3496 Guida Utente Pagina 4