Vitek VTC-C750WDR Manuale delle Istruzioni

BLACKVITEKVTC-C750WDR Wide Dynamic Range Color CCDCamera w/550TVL • Wide Dynamic Range 1/3" Color DPS Pixim Image Sensor• 550 TV Lines of Resolut

VTC-C750WDR 107.4 EXPOSURE menu EXPOSURE menu is provided to help the settings with the possible parameters obtained and assumed by the fac

VTC-C750WDR 11 7.6 ZONE ADJ menu Adjusts the size and the location of the metering zone for the dynamic range control. Dynamic range cont

VTC-C750WDR 127.8 DAY / NIGHT menu 7.9 DAY/NIGHT SETUP menu DAY/NIGHT Descriptions <AUTO

VTC-C750WDR 137.10 SHUTTER LIMIT menu 7.11 WHITE BALANCE menu (in PITURE CONTROL menu) To enter PICTURE CON

VTC-C750WDR 147.12 MANUAL WHITE BALANCE menu (in PITURE CONTROL menu) To enter MANUAL WHITE BALANCE menu, press button at <MANUAL...> of WH

VTC-C750WDR 157.14 LENS SELECT menu DC auto iris lens or MAUAL lens can be used for this camera but DC auto iris lens must be used in

VTC-C750WDR 167.16 SAVE / RESTORE / EXIT menu MENU-2 Descriptions SAVE AND EXIT Exits menu after saving the paramet

VTC-C750WDR 178. Specifications Model name VTC-C750WDR VTC-C750WDR/PAL Image Device 1/3" RGB Color DPS SENSOR (Pixim Orca D1500series) Effe

VTC-C750WDR 189. Dimensional Drawings (Unit: mm)

VTC-C750WDR 1910. Setup Menu Tree

VTC-C750WDR 2 To prevent fire or shock hazard, do not expose the unit to rain or moisture. The symbol is intended to alert the use

28492 CONSTELLATION ROAD VALENCIA, CA 91355WWW.VITEKCCTV.COM | 888-VITEK-70

VTC-C750WDR 3Table of contents 1. Safety Instructions and Notes…...

VTC-C750WDR 41. Safety Instructions and Notes • Please read these safety and operating instructions before putting the camera into operation. •

VTC-C750WDR 52. General Descriptions VTC-C750WDR (VTC-C750WDR/PAL for PAL)) is a superb wide dynamic range camera which achieves 120dB max(102dB t

VTC-C750WDR 6③① ② ④ ⑤ 4. Part Names 4.1 Front view - Lens Connector for Auto-iris lens (DC Drive)

VTC-C750WDR 7ⓐ ⓑ ⓒ ⓓ 4.2 Rear side view 5. Installation and commissioning Instructions • Make sure the power is removed

VTC-C750WDR 84. Loosen ④ Back focus Adjustment Lock Screw one~two turns on the camera with industrial “+” driver 5. Rotate ① Back Focus Adjustme

VTC-C750WDR 97. SETUP Menu 7.1 In the menu Use , buttons to move menu, , buttons to change the settings and press button short to select or