Vitek VT-E4 Manuale Utente Scaricare il pdf (Pagina 41)

SYSTEM : SYSTEM MANAGEMENT

S/W version : Shows the firmware version of the DVR.

H/W version : Shows the hardware version of the DVR.

VIDEO SIGNAL TYPE

: The DVR automatically switches between PAL and NTSC depending on the channel 1 input signal at

power on.

DISK CAPACITY

: The first value shows the amount of hard drive capacity used by recorded footage, the second value

shows the total hard drive capacity installed.

IP ADDRESS : Shows either the manual IP address entered in NETWORK setup or the IP address

assigned by a DHCP server if enabled

MAC ADDRESS : Shows the MAC (Media Access Control) address of the DVR. It is unique – no other

network device has this MAC address.

SYSTEM NAME : A system name of up to 10 characters can be defined. It is used so that notification

emails can be identified.

F/W UPDATE : Firmware updates may be released periodically to enhance system performance and

add extra features. The operator can upgrade the firmware using a USB memory stick.

FACTORY DEFAULT : If settings have been changed which cause erratic behavior, the factory default

settings can be loaded.

BACKUP DATA : System settings can be saved to a USB memory stick. The settings can be reloaded

in case of accidental factory reset or can be transferred to another DVR if multiple

units need to be installed with the same settings. All information is saved apart from

network settings and system name.

SYSTEM

Click the SYSTEM MANAGEMENT menu.

And click the PRESS menu for FW Upgrade,

Factory Default and System Data.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 82 83

Nessun commento

Vitek VT-E4 Manuale Utente Pagina 41